Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt

sku# CE500
Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
 
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
  • Darkglass Electronics Exponent 500 Bass Amplifier Head - 500 watt
$999.99

 
 
EXPONENTIAL POTENTIAL
 
Darkglass Electronics presents the Exponent 500, an elegantly simple amp with powerful signal path features accessible throught the Darkglass Suite app.  
 
There are five Quick-Pots on Exponent 500’s front panel (a, b, c, d and e) - by default, these pots are mapped to the Amp EQ’s four frequency bands and a preset-specific control.
 
In the Darkglass Suite, you can assign the Quick-Pots to any five controls from the effects in your signal chain.
 
Pressing the preset button cycles through 5 presets and bypass. The current preset is shown with a single LED next to the preset number.  When e500 is bypassed, all preset LEDs turn white.  When the e500 is muted, all preset LEDs turn red.
 
Long-press the preset button to start Bluetooth pairing (LEDs will pulse white while pairing).
 
Darkglass Suite
 
Exponent 500 comes preloaded with five versatile factory presets. Using e500 with the Darkglass Suite isn’t necessary, but we definitely recommend it!
 
Darkglass Suite unlocks the full potential of Exponent 500 by providing an interface to interact and modify the signal chain running on each preset.
 
Use the iOS or Android versions of the Darkglass Suite to create, edit, share, and apply presets.  Make sure to use Darkglass Suite version 4.3.0 or newer!
The SpeakON Combo jack allows for SpeakON or ¼” speaker cable operation - minimum load impedance is 4 Ω.  (Exponent 500 can be operated without a cabinet)
 
Effects Send/Return
 
1/4" Stereo Headphone Output
 
XLR direct output
 
Ground Lift
 
MIDI In - Standard DIN connector. Use the 7-pin MIDI connector only with the Darkglass MIDI footswitch, and use a 5-pin connector with other MIDI equipment.
 
USB - The USB-C port unlocks Exponent 500’s USB audio interface capabilities and allows for software updates via the Darkglass Suite. USB MIDI In/Out is also supported.
 
AC Socket - selectable voltage 100-120 / 200-240 VAC, 50-60 Hz.