Audio-Technica AT2035 Condenser Microphone

sku# CAT2035
Audio-Technica AT2035 Condenser Microphone
Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
 
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
  • Audio-Technica AT2035 Condenser Microphone
$149.99
 
 

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

  • Large diaphragm for smooth, natural sound and low noise
  • High SPL handling and wide dynamic range provide unmatched versatility
  • Custom shock mount provides superior isolation
  • Switchable 80 Hz high-pass filter and 10 dB pad
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Includes custom shock mount & protective pouch
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa
IMPEDANCE: 120 ohms
MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
NOISE: 12 dB SPL
DYNAMIC RANGE: (typical) 136 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.8 mA typical
SWITCHES: Flat, roll-off;
10 dB pad (nominal)
WEIGHT: 403 g (14.2 oz)
DIMENSIONS: 170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE: R5
Recommended Products
Audio-Technica AT2020USB+ Condenser Microphone

$169.99

View Details

Hot Wires Microphone Cable 20"

$16.99 $10.99

View Details

Go Mic by Samson - Portable USB Microphone

$64.99 $39.99

View Details